These settings need to be set on each workstation that is going to be used to print labels. When the printer is installed and the test page prints okay, the next step is to configure it for use with labels. If you need help with installing your label printer please refer to the manual supplied with the printer, check the printer manufacturer’s website or call the printer manufacturer’s support desk. Before you can set up your label printer it needs to be installed on the workstation(s) by you or your IT person. For some more detailed help feel free to call Ink Hub on (08) 7324 3065.This article gives instructions specific for Brother label printer setup. Other than the actual Print Head being damaged there is nothing else which can cause these issues. If you do several cleans and it doesn't improve then you may need a Print Head Cleaning Kit which uses strong solvents to dissolve any dry ink stuck in the print head. From there you can select to clean individual colours or the whole lot at once. To unblock the print head you will need to go to your printers menu and find the 'Nozzle Cleaning' Utility. This occurs when ink dries on the surface of the print head due to the printer not being used for a while or else a poor quality ink being used which tends to dry easily and blocks the small holes on the print heads surface. If the breather tape has been fully removed then the issue is more than likely a clogged print head. If for example the Yellow Colour is not printing then check that the breather tape on the top of the ink cartridge has been fully removed. Once you have printed the test page you will clearly be able to see if one colour is not printing correctly. To print the test page simply click on the link and hover your cursor over the image, right click on the image and select 'Print Image'. If your printer is not printing the correct colour combinations then by printing a Test Page you can easily work out what may be the cause. Of course they also use Black however we will discuss this later. The 3 main colours used by your inkjet printer are Cyan (Bluey Colour), Magenta (Reddish Colour) and Yellow. Is your printer producing the correct colours that it should be? If not it is easy to isolate the problem by using a Test Page.

Brother printer test page